Compatible with both X Series and A Series
Control4 Drivers
For those interested in adding a VSSL amplifier to their Control4 system, VSSL and Chowmain Software have teamed up to develop and provide free Composer drivers for the VSSL X Series (A.1x, A.3x, and A.6x) and 1st generation VSSL A Series (A.1, A.3, and A.6).
Links to X Series Drivers:
Links to A Series Drivers:
Once installed, be sure to check out the “Documentation” tab within Composer for in-depth setup instructions.
Features:
- Automatic discovery upon entering MAC address.
- Self-healing if IP address changes occur.
- Simple setup of Automatic Room On assignment for amplified zones upon audio endpoint binding
- Automatic detection and display of streaming source via navigator
- Supports the following streaming protocols:
- Amazon Alexa
- Apple Airplay 2
- Google Cast
- Spotify Connect
- Play/Pause/Stop/Skip/Next commands for streams.
- Discrete Volume, Volume Up, Volume Down control and feedback
- Discrete Mute On, Mute Off, Mute Toggle and feedback.
- Metadata for streams
- RCA, Digital Optical, Digital Coax Input switching (A.1x & A.1 only)
- Automatic Room on for 3rd party devices (receivers and other amplifiers) connected to the outputs.
- Front Panel LED control
- Properties, Line Level Output Fixed/Variable Volume, Max Volume, Source Priority, Mono Output
- Disable Auto Switch on Inputs
Limitations:
- Streams cannot currently be initiated from Control4 due to our Native Streaming technology. You can, though, start any of the Control4-supported music streams and play them to your VSSL device from the Control4 app.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article